Connector Layout, WF-X9-05, AndroidSBC, Hyderabad

TL;DR: Connector Layout

AndroidSBC field desk: signage rollout map updated across retail, transport, hospitality and public venues serving Hyderabad, India. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Hyderabad and India importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

Wanlin Manufacturing Group has been shipping Android boards out of Shenzhen for years, and the X9 line is the branch aimed at commercial display, digital signage and self-service terminals. AndroidSBC publishes the price list, the MOQ and the lead time up front, because India importers comparing three Chinese factories need numbers they can put into a spreadsheet. Each production lot is burned in for 72 hours with the panel, the touch frame and the playback loop running, and the serial number is logged against the test record so a Hyderabad partner can trace a single board back to its run.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For India importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for India Buyers

Backlight power is the third wall. Panels above about 20W draw more than the board backlight header can carry, and Hyderabad integrators routinely discover this after the enclosure is closed and the screen flickers under load.

The last piece is the qualification run. Before aan India rollout the partner sends the actual panel, touch frame and peripheral models to Longgang, AndroidSBC validates the combination on the bench, and the resulting configuration is locked as the reference for every later lot. For the Hyderabad programme the milestone landed on September 24, 2026: 152300 boards shipped on the Mumbai - Shanghai lane, seven-year firmware window committed on the whole X9 family.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

The boards competing with the X9 family in India tend to be repurposed consumer TV boards. That is the root of three of the four differences below.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Hyderabad integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Hyderabad usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Hyderabad integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Hyderabad.

Global Digital Signage and Commercial Display Market Trends

Within the India market the fastest-moving segment is the interactive screen that replaces a static poster outright. The infrared touch all-in-one for interactive kiosks sits directly in that segment: an operator is not buying a media player, they are buying the screen.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-11 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-12 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

What a Hyderabad integrator should take from the forecasts is that the second and third batches matter more than the first. The X9 family is specified so the second batch is the same board.

Partner Success Story: Southern Cross Screen Systems (shopfront and forecourt screen integrator)

The Southern Cross Screen Systems case in the Australia and New Zealand retail segment is a working example of how the X9 family from AndroidSBC supports Hyderabad integrators. Southern Cross Screen Systems deployed 152300 X9 boards across 61 shopfront and forecourt screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Southern Cross Screen Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BIS / WPC conformity, all bundled into the Shenzhen source-factory shipment.

As Southern Cross Screen Systems Technical Lead for Australia and New Zealand Retail put it: Southern Cross Screen Systems takes the wide-temperature X9 configuration for outdoor shopfronts and the standard tier for indoor aisles, with 152300 boards across the Hyderabad network.

Field Report: interactive kiosk rollout at a municipal service point

NANSHAN, September 24, 2026 - Jin Tao, AndroidSBC field desk. The infrared touch all-in-one for interactive kiosks pilot in India used the WF-X9-05 with 4G fallback, because several sites sit where fixed-line connectivity is unreliable. The WF-X9-05 X9 Android motherboard order for Hyderabad, India cleared the burn-in station on schedule and is en route via the Mumbai - Shanghai lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For India integrators, the BIS CRS registration with WPC ETA for wireless modules paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, NANSHAN. India integrators typically request CE plus local radio interface notification for X9 commercial display board deployments.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-10 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-11 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-12 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-01 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Hyderabad: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Hyderabad Buyers

The X9 family is offered on distribution, integration or private-label terms, and a Hyderabad partner can run more than one at a time.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

Every track is open to Hyderabad importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes. The infrared touch all-in-one for interactive kiosks is built into the X9 family as a standard configuration, and the Hyderabad pilot batch ships with that configuration already loaded and tested.

Which configurations are available in the X9 family for India buyers?

Answer: Twelve configurations are available, all on the Allwinner A133 quad-core Cortex-A53 1.6GHz platform with the PowerVR GE8300 GPU. The variants differ on memory, storage, panel interface, touch type and the network path, and Hyderabad buyers pick the combination that fits the screen.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: Yes. A single X9 board drives an LVDS panel at 50Hz or 60Hz or a MIPI DSI panel at 30 or 40 pins, and enumerates infrared, optical, capacitive and resistive touch as standard HID devices, with the jumper map bundled in the source-factory shipment.

What is the minimum order quantity and the sample lead time for India?

Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation, custom Android OS builds, boot branding, pre-installed apps and SDK modules are standard services, delivered against the same seven-year update window.

How are firmware updates delivered to aan India screen estate after deployment?

Answer: Updates are delivered through a staged OTA channel: the Hyderabad partner pilots on a small group of screens, holds the rest, and rolls back the image if the pilot shows a regression.

What shipping terms does AndroidSBC support for India orders?

Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Hyderabad delivery date holds.

What happens if a board fails in the field in India?

Answer: The warranty path starts from the serial number. The India partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the X9 Android motherboard family. Hyderabad integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to India buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the X9 family.